I made puddle beads (and some puddles!). I added colors and textures using oil paint, alcohol inks, spices, even some glass frit. Glass frit is used by glass bead makers and stained glass makers. It is finely ground glass, in various colors. And I found out the hard way that some of it is sharp....duh, broken glass.
I painted resin on some different types of paper and some dried leaves, bits and pieces of nature I have found (sticks, shells, butterfly wings). I made some small bezels by taking some wire, twisting it to make a closed opening...hmmm...does that make sense? Closed opening? Oh well, then I hammered the wire. I laid some small pieces of pretty paper on some wax paper, laid the hammered wire on top, and poured a bit of resin in. Worked really well. Usually I place a piece of packing tape on the back of an open bezel, then add resin, paper, etc. I used a mold with various sizes of round cabs, and added some resin with spices. The pieces fit nicely into some open bezel frames. I think I will use them for charms. I covered buttons with resin...those came out pretty cool. Then I had some old, large shank buttons with indents on them. I poured some resin in them. I thought those were pretty cool too.
Anyway, I had a fun time. I got resin in my hair...talk about worse than bubble gum to get rid of!
My resin mix got hot to the touch and created a clump that went into the trash. How did that happen? I put my Part A and Part B bottles in a small bowl with warm water to heat them before I mix a batch. I got the water too hot, so when I mixed the resin batch...it got really hot to the touch and hardened as fast as I could get it out to the garage. I thought it might catch fire or something....
Some of the things I discovered (which a bunch of other people probably already know) are:
If I want a resin piece to have a matte finish, I can do that easily by spraying the dried piece with Krylon Matte spray. Dried resin can be easily cut with a pair of scissors. A puddle of resin, after sitting for about 4-6 hours, can be cut into strips and rolled into beads. A piece of scotch tape to hold the rolled bead until it dries completely keeps the bead from unrolling. Oil paints create beautiful colored resin. All I needed for a 2 ounce mix was a bit of oil color on the end of a toothpick. Alcohol inks will mix into the resin, and the resin will cure properly.
Letting the mixed resin sit in the cup for a max of 20 minutes results in a thickening of it, which can be brushed on a dapt filigree to easily fill the openings. I don't know why I did that...just wanted to see if I could.
That is the fun of fooling around with a medium. I try stuff just to see if it would work. I also find out some things that don't work.
My friend and I will be getting together next week to fool around with Resin together. We both have some ideas about what to try next!
Below are some of the results. The top left is a Resin Puddle. I have no idea what to do with that. The blue pieces are the beads. Oh, forgot to mention the heart. I took two metal stampings that I got from B'sueboutiques.com. An open heart and a closed heart. I filled the bottom heart with some colored resin, then pressed the top heart on. The resin domed in the opening and looks like a gemstone.
I am looking forward to next week!